Rexel UK-2 Cutting Table for Roller Blinds

Rexel UK-2 Cutting Table for Roller Blinds

Rexel UK-2 Cutting Table for Roller Blinds

The Rexel UK-2 cutting table is a modern and efficient construction of the second generation. It uses a round knife to cut fabrics for roller blinds.
Request A Quote
Special Order
SKU
UK2

The UK-2 cutting table is a modern and efficient construction of the second generation. It uses a round knife to cut fabrics for roller blinds.

The operator can control the movement and rotation speed of the table and thanks to the accurate length and angle measurement system, the cut is always precise and the sheet of fabric is cut exactly to the needed length.

This sturdy, durable table is made of powder-coated steel profiles that ensure that the table will serve your production for years to come.

The tabletop is made of 18mm laminated chipboard. This table can cut fabric up to 3000 mm in width, and a large backlight makes it possible to check the fabric for defects before cutting.


Advantages of the cutting table:
- Control panel with durable buttons;
- Tabletop illumination zone for fabric inspection;
- Improved manual positioner for 90º angle set;
- Pneumatic clamping line;
- The table is made in Poland from components from the EU;
- Energy chain for cutter cables protection;
- Two direction cutting ability;
- Round blade sharpening device; 

Specifications:
Cutting width: up to 3000 mm
Tabletop width: 3200 mm
Tabletop length after cut-off line: 3100 mm or longer
Whole width: 3620 mm
Whole length: 3750 mm or longer
Tabletop height: 900 mm
Cutting speed: Min: 0,3 m/s, Max: 0,5 m/s
Blade rotation speed: 4200 rpm
Blade diameter: 108 mm
Voltage: 230 V
Wattage: 700 W
Ultrasonic knife: No
Mechanical round knife: Yes
Fabric clamp: Pneumatic, one side
Screen: Yes, optional

Write Your Own Review
You're reviewing:Rexel UK-2 Cutting Table for Roller Blinds