Juki Series DU-1181N 1-Needle, Top and Bottom Feed, Lockstitch Machine with Double-capacity Hook
Higher lift of the presser foot
The lift of the presser foot, by the knee lifter, is as high as 15mm so as to support processes which require a higher lift of the presser foot, such as piping and tape-attaching.
The maximum stitch length is 9mm
With its stitch length being as large as 9mm, the machine is applicable to a broader range of sewing processes.
The double-capacity hook is provided as standard
The Juki DU-1181N comes with a horizontal-axis double-capacity, not only to decrease the frequency of bobbin thread changing, but also to enable sewing work with increased efficiency.
Automatic lubricating mechanism
A pump-unit type automatic lubricating mechanism dramatically improves maintainability. The oil amount in the face plate and hook is adjustable. The top feed mechanism employs a grease tank and oil wick lubrication mechanism.
The Juki DU-1181N achieves low-vibration and low-noise
The Juki DU-1181N machine head is designed to achieve optimum balance, thereby reducing vibration and noise. The machine affords the operator a comfortable working environment.
The stitch pitch can be adjusted in both the normal and reverse directions. The height and inclination of the feed dog can be adjusted. The amount of the alternating vertical movement of the walking foot and presser foot is adjustable in a range from 2 to 5mm according to the height of a multi-layered section of material. The horizontal feed cam and top feed cam can be adjusted after opening the rubber caps (three caps) on top of the machine head.