Juki Digitally Smart Solution Series PLC-2710V-7 Semi-dry, Direct-drive, Post-bed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook
Digital Machine Adjustment
Digitalization adjustment made it possible for core specifications such as thread tension, pitch length, sewing speed, presser foot pressure, and alternating vertical movement. Crucial adjustment work is now made simple without excessive experience and skills while reinforcing high-quality reproductions. Man-hours in setup changing and maintenance are substantially reduced. Password protection is introduced to ensure that alteration of settings by an unauthorized third party is prevented.
Active Presser foot
Presser foot pressure can be controlled, managed, and set (numerical) digitally. Automatic detection or manual hand switch control can be selected to allow adjustments of presser foot pressure in response to a multi-layered section of material. When sensor detects a multi-layered section during sewing operation, the system can automatically adapt to it by changing to another pre-registered setting (pitch length, upper thread tension, presser foot pressure, and alternating vertical movement). The multi-layered detection threshold value is automatically calculated based on the measured value.
Custom Pitch Settings
Functions such as automatic switchover of pre-registered patterns in a cycle operation (Cycle pattern, Polygonal-shape stitching) or Custom pitch composing for continuous sets of different pitch length are available for user convenience.
A switch which allows a "One-touch" switchover of pattern and functions. In addition to the one-touch changeover switch to which any desired operation can be assigned, automatic reverse feed switchover switch and the needle entry alignment switch are also available. Jog dial - Pulley rotates in correspondence to the dial. Lifting and dropping of the needle bar can be done without reaching out to the handwheel. In addition, the dial works as the needle "UP/DOWN" correction switch when it is pushed.